New · PiTower for Raspberry Pi 5 — OLED + triple RGB fansSee it
NVMe HAT V2 for Raspberry Pi 5, photo 1

NVMe HAT V2 for Raspberry Pi 5

PCIe to M.2 NVMe · 2230–2280 · with 2-pin power cable

No reviews yet — be the first

A PCIe to M.2 NVMe SSD expansion board for Raspberry Pi 5. Supports 2230, 2242, 2260 and 2280 M-Key NVMe SSDs, includes a custom FPC cable and an extra 2-pin power cable, and is made for storage expansion and booting from NVMe.

  • M-Key NVMe, 2230 to 2280
  • Boots Raspberry Pi 5 from NVMe
  • Extra 2-pin power cable for power-hungry SSDs
  • Optional PCIe Gen 3 on compatible SSDs
Needs a little setup — try it firstRun the real commands on a simulated Raspberry Pi 5. 9 steps, about 8 min.
NVMe HAT V2 for Raspberry Pi 5

Try before you buy

Set it up before it arrives.

Turn on PCIe, check the SSD is detected, set the bootloader, write Raspberry Pi OS to the SSD and boot from it — the same steps as our INV001 guide, typed into a simulated Raspberry Pi 5.

  • The same commands as our written setup guide
  • Realistic output, right in your browser — nothing to install
  • 9 steps · about 8 minutes
Prefer reading? INV001 setup guide
Full-page version

Setup lab · NVMe HAT V2

Boot Raspberry Pi 5 from NVMe with the NVMe HAT V2

Tech specs

Specifications

Made for Raspberry Pi 5

Compatible board
Raspberry Pi 5 (uses the Pi 5 PCIe connector)
SSD
M-Key M.2 NVMe only (no M.2 SATA)
SSD sizes
2230 / 2242 / 2260 / 2280
PCIe
Gen 2 by default · Gen 3 optional on compatible SSDs
Extra power
XH2.54 5V input, 2-pin cable included
In the box
HAT, 40 mm FPC cable, 2-pin power cable, screws, standoffs, screwdriver
SKU
INV001

Customer reviews

From people who built with it

Built something with this? Sign in to leave a review.

Sign in to review
No reviews yet

Be the first to share how it worked in your build.

Questions & answers

Ask the community

Ask a question
No questions yet

Wondering about fit, thermals or setup? Ask here — other makers and our team can answer, and the thread shows up on this page.

Ask the first question

Complete the build

Pairs well with

All Raspberry Pi 5 gear