New · PiTower for Raspberry Pi 5 — OLED + triple RGB fansSee it
PiTower Aluminum Mini Tower, photo 1

PiTower Aluminum Mini Tower

Aluminum mini tower case for Raspberry Pi 5

No reviews yet — be the first

Turn a Raspberry Pi 5 into a proper desktop mini PC. The PiTower wraps your board in aluminum, adds a 1.3" OLED and three RGB fans up front, and leaves room for an NVMe SSD.

  • 1.3" OLED display on the front panel
  • Triple RGB fans for CPU and SSD airflow
  • NVMe SSD and PCIe support (M.2 HAT compatible)
  • RTC battery integration for accurate timekeeping
  • Safe-shutdown power button, every port accessible
Needs a little setup — try it firstRun the real commands on a simulated Raspberry Pi 5. 5 steps, about 6 min.
PiTower Aluminum Mini Tower

FAN3 · AIRFLOW

Triple RGB cooling.

Three RGB fans move air across the CPU and your NVMe SSD — made for the jobs a Pi 5 actually gets: NAS duty, programming, media serving.

  • 3 × RGB fans
  • CPU + SSD airflow
46°C

OLED1 · STATUS

Give your Pi a face.

A 1.3-inch OLED on the front panel puts temps, IP or uptime where you can see them — no SSH session needed to check on your build.

  • 1.3" OLED
PITOWER · 128×6446°Ccpu temp

J8 · PCIe

Room to grow.

Fit an M.2 HAT and an NVMe SSD inside the tower over PCIe, plus an RTC battery so the clock keeps time through a power cut.

  • M.2 HAT compatible
  • NVMe SSD
  • RTC battery
M.2 NVMe HATRASPBERRY PI 5RTC

Try before you buy

Set it up before it arrives.

Install the small service that drives the OLED and the power button, switch on I2C bus 0 and restart — then watch the stats come up and shut the Pi down from the button. The case’s real setup steps, on a simulated Raspberry Pi 5 inside it.

  • The same commands as our written setup guide
  • Realistic output, right in your browser — nothing to install
  • 5 steps · about 6 minutes
Prefer reading? Elecrow setup guide
Full-page version

Setup lab · PiTower

Set up the PiTower OLED and power button

Tech specs

Specifications

Made for Raspberry Pi 5

Compatible board
Raspberry Pi 5
Material
Aluminum alloy
Display
1.3" OLED
Cooling
Triple RGB fans (active cooler)
Storage
NVMe SSD via PCIe, M.2 HAT compatible
Clock
RTC battery integration
Power button
Safe shutdown
Ports
All accessible
SKU
IU-PITOWER-5

Customer reviews

From people who built with it

Built something with this? Sign in to leave a review.

Sign in to review
No reviews yet

Be the first to share how it worked in your build.

Questions & answers

Ask the community

Ask a question
No questions yet

Wondering about fit, thermals or setup? Ask here — other makers and our team can answer, and the thread shows up on this page.

Ask the first question

Complete the build

Pairs well with

All Raspberry Pi 5 gear